More often than anyone likes to think about, optimizing process applications is a lonely business. Users must often deploy sensors, instruments, I/O, controls and networks with far less precedence than they’d prefer about how well they’ll work together to fulfill the requirements of their individual applications. This know-how is even more important in safety processes, so even potential innovations like Ethernet-Advanced Physical Layer (APL) must be thoroughly evaluated before it can deliver on its promise of allowing Ethernet networking into intrinsically safe (IS) and other hazardous areas. Here’s the latest on how those efforts are proceeding.
Putting Ethernet-APL to the test
So far, there are only two documented, user-based Ethernet-APL testbeds. The first at Procter & Gamble was covered by Control in last year’s version of this story. Here’s how BASF and its partners are adopting and testing Ethernet-APL for wider implementation in the future. Read here
Faster for wider reach
Thanks to its far greater speed, Ethernet-APL can connect to more sensors, transmitters and other field devices, depending on what their existing DCS interface can handle. This is why the four standards development organizations (SDO) partnered with 12 suppliers to develop it. Read here
DIY on the physical layer
As with any industrial network project, understanding users’ underlying needs for Ethernet-APL is crucial to determining how to apply it and what technologies and training will be required. R. Stahl shows how users can implement the two-wire protocol in hazardous areas. Read here
Endress+Hauser sets a good example
In a further boost to applying Ethernet in intrinsically safe (IS) locations, Endress+Hauser reported March 30 that it just conducted two successful load tests of a realistic Ethernet-APL setup at its headquarters in Reinach, Switzerland. The tests were designed with end-user specifications from BASF and hardware from ABB, Endress+Hauser, Honeywell and Pepperl+Fuchs. Read here
Scaling up to gain speed
Emerson reports planning and infrastructure are crucial for Ethernet-APL installations. This is where it can help because it’s simpler to implement, much like familiar 4-20 mA, and can provide power and intrinsic safety along with communications using two-wire, twisted, shielded-pair cable. Read here
Suppliers beat Ethernet’s path to hazardous areas
While much of the inspiration for Ethernet-APL comes from user and standards bodies, most of the innovations and tools for making it happen comes from their supplier partners, such as Phoenix Contact, Rockwell Automtion, Softing and Yokogawa.. Here’s their take on how it’s unfolding. Read here
Nine ways to understand Ethernet-APL
Control's monthly resources guide. Read here
